Double Seal For Bottom Entry
Seal Type 532/D and 532/D/B Mechanical Seals are designed for Bottom and Side Entry Drives in Rectors. Compact Economical Cartridge Double Mechanical Seal. The design may either without bearing (Type 532/D) or with integral bearing (532/D/B). Complete Pre-assembled Tested Unit ready for installation. These Seal are used for Exclusive Solid Seal Faces, Stationary Seats, thus Lowest Level of Seal Face distortion when Expose to Compressive Load and Thermal Pressure.
Balance Pusher Seals using for Sealing Environment. Double Seals are excellent with low RPM Operation in Full Vacuum and Pressure. These Seals are a Multiple Spring Back to Back Arrangement and Balance Seal with ‘O’ Ring as secondary Sealing member. Various Elastomer can be offer for various Liquid applications. The Cooling Chamber of Seals also having a Standard Feature which helps to maintain Cool Environment around the Seal.
- Seal Ring Faces : Carbon, SiC and TC
- Seat Faces : SiC and TC
- Elastomer : Viton, TTV, FEP and FFKM
- MOC : SS 316 – CHANGE OF MOC ON REQUEST
- Shaft Dia. : 20mm to 150mm
- Pressure : Full Vacuum to 10 bar
- Temperature : -30°C to 260°C AC (Depending upon Elastomer)
- Speed: 300 r.p.m.