Single Spring Mechanical Seal
SEAL TYPE: 61U & 62U

Seal Type 61U Single Spring Mechanical Seal are are designed and manufactured to meet all the requirements and most suitable for this applications. These seal are Internally Mounted Unbalanced design which Seal having ‘O’ Ring as a Secondary Sealing member. Seal Type 62U Mechanical Seal are Internally Mounted Unbalanced design which Seal having PTFE Wedge as a Secondary Sealing member. Secondary Sealing member can be changed as per Chemical Compatibility. The Helical Coil Spring designed Seal help to Seal the Dirty and Clogging type of application. Construction of these Seals designs hold whole Rotary Parts together with the help of Snap Rings which is make easiest for Installation and Removal.

- Single Acting Unbalance Pusher type Mechanical Seal.
- Dual Directional Mechanical Seal.
- Inside Mounted Mechanical Seal.
- Independent Direction of Rotation.
- Type 62 seal having Universal Chemical Compatibility due to design of PTFE Elastomer
- Seal Ring Faces : Cabon, GFT, SiC and TC
- Seat Faces : Ceramic, SiC and TC
- Elastomer : Viton, PTFE, EPDM, NBR, Buna-N
- MOC : SS 316
- Shaft Dia. : 10mm to 100mm
- Pressure : Up to 8 bar
- Temperature : -20°C to 260°C (Depending upon Elastomer)
- Speed: 3000 r.p.m.

Pusher Seals
- Conical Coil Spring Mechanical Seal – TYPE -31
- Single Coil Spring Seal – TYPE -43 & 44
- Single Coil Spring Seal – TYPE -41 & 42
- Multi Spring Seal – 51B & 52B
- Multi Spring Seal – 51U & 52U
- Single Spring Seal – 44UC
- Single Spring Seal – 61U & 62U
- Reverse Balance Multi Spring Seal – 74
- Reverse Balance Multi Spring Seal – 73