Dry Running Seal
SEAL TYPE: SPD103 & SPD103/B
Seal Type SPD103 and SPD103/B Mechanical Seals are designed for Top, Bottom and Side Entry Drives in Agitators, Mixers OR Blenders and where Non-Aggressive and Non-Hazardous Media are Sealed with the use of Cooling Liquid preventing against Dry Running. Construction of MOC designed of these Seals purpose of holding whole Rotary Parts together with the help of Snap Rings which eases while Installation and Removal of Seals.
Features
Balance Pusher Seals which gives better performance in and for Sealing Environment. Dry Run Seals are excellent with Low RPM Operation in Vacuum conditions and as well as Undemanding Mixers Application. These Seals Design for using either without Bearing (Type SPD103) OR with Integral Bearing (Type SPD103/B). These Seals are a Multiple Spring basically External Mounted Seal with ‘O’ Ring as Secondary Sealing Member. Various Elastomer can be offer for various Liquid Applications. These Seal Designed with Cooling Water Jacket which ensure cool Running of Seals.
Materials
- Seal Ring Faces : Carbon and SiC
- Seat Faces : SiC and TC
- Elastomer : Viton, TTV, FEP and FFKM
- MOC : SS 316 – CHANGE OF MOC ON REQUEST
Operatiing Capabilities
- Shaft Dia. : 20mm to 150mm
- Pressure : Full Vacuum to 8 bar
- Temperature : -30°C to 150°C
- Speed: 300 r.p.m
